Would you like to react to this message? Create an account in a few clicks or log in to continue.

Guide: Coolant Pump

Go down

Guide: Coolant Pump Empty Guide: Coolant Pump

Post by Qu1ksilver Wed Apr 09, 2014 7:01 pm

Okay I went ahead and changed the coolant pump by following various guides relating to the VR6 engine. Its really simple actually and I can confirm you DO NOT need too mess about jacking up the engine.

1: Before removing the aux belt start by cracking loose the three 6mm allen bolts that hold the coolant pump pulley

2: Now de-tension the tensioner and remove the aux belt and coolant pulley

Guide: Coolant Pump Photo1_zps8b097d4d

3: Crack loose the three M6 spline bolts that hold the pump to the engine block (I put this step before draining coolant just so you know if you can successfuly remove the bolts without any problems, before draining coolant)

Guide: Coolant Pump Spline_zpsf924d276

4: Now drain the coolant by removing the clip and hose from the radiator on the passenger side

Guide: Coolant Pump Photo2_zpse95d51ca

5: Remove the old pump, there is plenty of room to do this and no need to lift the engine, see!

Guide: Coolant Pump Photo3_zps576694fd

6: Fit new pump and pulley, re-fill coolant, re-fit belt and re-tension.



Posts : 20
Join date : 2014-02-25

Back to top Go down

Guide: Coolant Pump Empty Re: Guide: Coolant Pump

Post by Dobbs Sun Apr 20, 2014 1:46 pm

Well done that man and thanks for the photo guide!  cheers 

Dobbs. Cool


Posts : 37
Join date : 2014-02-17

Back to top Go down

Back to top

Permissions in this forum:
You cannot reply to topics in this forum